Table 19-4 Node View Card Colors; Table 19-5 Node View Fmec Color; Table 19-6 Node View Card Statuses - Cisco ONS 15454 DWDM Installation And Operation Manual

19.5.1 Node View
Table 19-4
Card Color
White
Yellow
Orange
Red
On the ONS 15454 ETSI, the colors of the Front Mount Electrical Connection (FMEC) cards reflect the
real-time status of the physical FMEC cards.
shown in CTC do not change color.
You cannot preprovision FMECs.
Note
Table 19-5
Upper Shelf FMEC Color
White
Yellow
Orange (Amber)
Red
The wording on a card in node view shows the status of a card (Active, Standby, Loading, or
Not Provisioned).
Table 19-6
Card Status
Sty
Act
NP
Ldg
Port color in both card and node view indicates the port service state.
their service states. For more information about port service states, refer to
Administrative and Service States."
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
19-8
Node View Card Colors (continued)
Status
Slot is provisioned; a functioning card is installed.
Slot is provisioned; a Minor alarm condition exists.
Slot is provisioned; a Major alarm condition exists.
Slot is provisioned; a Critical alarm exists.
Node View FMEC Color
Status
Functioning card is installed.
Minor alarm condition exists.
Major alarm condition exists.
Critical alarm exists.
Table 19-6 lists the card statuses.
Node View Card Statuses
Description
Card is in standby mode.
Card is active.
Card is not present.
Card is resetting.
Chapter 19
Table 19-5 lists the FMEC card colors. The FMEC ports
Table 19-7
CTC Operation Reference
lists the port colors and
Appendix C, "DWDM
August 2005