Cisco ONS 15454 DWDM Installation And Operation Manual page 359

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

Chapter 5
Provision Transponder and Muxponder Cards
DLP-G319 Change the TXP_MR_10G or TXP_MR_10E Card Line Thresholds for
10G Ethernet LAN Phy
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Display the TXP_MR_10G or TXP_MR_10E card where you want to change the line threshold settings
Step 1
in card view.
Click the Provisioning > Line Thresholds > RMON Thresholds tabs.
Step 2
Click Create. The Create Threshold dialog box appears.
Step 3
From the Port drop-down list, choose the applicable port.
Step 4
Step 5
From the Variable drop-down list, choose an Ethernet variable. See
Ethernet thresholds.
Table 5-7
Variable
ifInOctets
rxTotalPkts
ifInMulticastPkts
ifInBroadcastPkts
ifInErrors
ifInErrorBytePkts
ifInFramingErrorPkts
ifInJunkInterPkts
ifOutOctets
txTotalPkts
ifOutMulticastPkts
ifOutBroadcastPkts
September 2005
DLP-G319 Change the TXP_MR_10G or TXP_MR_10E Card Line Thresholds for 10G Ethernet LAN Phy
This task changes the line threshold settings for TXP_MR_10G and
TXP_MR_10E transponder cards carrying the physical 10G Ethernet LAN
payload.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
TXP_MR_10G and TXP_MR 10GE LAN Phy Variables
Description
Total number of octets received on the interface, including framing
characters.
Total number of received packets.
Number of multicast frames received error free.
Number of packets, delivered by a sublayer to an higher sublayer,
which were addressed to a broadcast address at this sublayer.
Number of inbound packets that contained errors preventing them
from being delivered to a higher-layer protocol.
Number of receive error bytes.
Number of receive framing error counters.
Number of receive interpacket junk counters.
Total number of octets transmitted out of the interface, including
framing characters.
Total number of transmit packets.
Number of multicast frames transmitted error free.
Total number of packets that higher-level protocols requested be
transmitted, and that were addressed to a broadcast address at this
sublayer, including those that were discarded or not sent.
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
Table 5-7
for a list of available
5-21

Advertisement

Table of Contents
loading

Table of Contents