Figure 8-5 Store Profiles Dialog Box - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 8 Manage Alarms
Figure 8-5
Choose the node where you want to save the profile:
a.
Save the profile:
b.
Step 15 As needed, perform any of the following actions. The following options are located at the bottom of the
Provision > Alarm Profile window.
Click the Hide Identical Rows check box to configure the Alarm Profiles window to view rows with
•
dissimilar severities.
Click the Hide Reference Values check box to configure the Alarm Profiles window to view
•
severities that do not match the Default profile.
Click the Only show service-affecting severities check box to configure the Alarm Profiles
•
window not to display Minor and some Major alarms that will not affect service.
Step 16 Return to your originating procedure (NTP).
September 2005
Store Profiles Dialog Box
If you want to save the profile to only one node, click the node in the Node Names list.
•
If you want to save the profile to all nodes, click Select All.
•
Press the Ctrl key, and simultaneously left-click the node where the profile is to be saved.
•
If you do not want to save the profile to any nodes, click Select None.
•
If you want to update alarm profile information, click (Synchronize).
•
Click OK to save the profile.
•
• Click Browse and navigate to the profile save location.
• Enter a name in the File name field.
Click Select to choose this name and location. Long file names are supported. CTC supplies a
•
suffix of *.pfl to stored files.
• Click OK to store the profile.
DLP-G121 Create a New or Cloned Alarm Severity Profile
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
8-19