Cisco ONS 15454 DWDM Installation And Operation Manual page 23

CTC Operation Reference
19
C H A P T E R
August 2005
18.2.1 Hubbed Rings
18.2.2 Multihubbed Rings
18.2.3 Any-to-Any Rings
18.2.4 Meshed Rings
18.2.5 Linear Configurations
18.2.6 Single-Span Link
18.3 Optical Performance
18.3.1 Optical Performance for Rings and Linear Networks with OADM Nodes
18.3.2 Optical Performance for Linear Networks Without OADM Nodes
18.3.3 Optical Performance for ROADM Rings and Linear Networks
18.3.4 Optical Performance for Single-Span Networks
18.4 Automatic Power Control
18.4.1 APC at the Amplifier Card Level
18.4.2 APC at the Node and Network Levels
18.4.3 Managing APC
18.5 ROADM Power Equalization Monitoring
18.6 Span Loss Verification
18.7 Network Optical Safety--Automatic Laser Shutdown
18.7.1 Scenario 1: Fiber Cut in Nodes Using OPT-BST/OPT-BST-E Cards
18.7.2 Scenario 2: Fiber Cut in Nodes Using OSC-CSM Cards
18.8 Network-Level Gain-Tilt Management of Optical Amplifiers
18.8.1 Gain Tilt Control at the Card Level
18.8.2 System Level Gain Tilt Control
18.8.2.1 System Gain Tilt Compensation Without ROADM Nodes
18.8.2.2 System Gain Tilt Compensation With ROADM Nodes
19.1 CTC Software Delivery Methods
19.1.1 CTC Software Installed on the TCC2/TCC2P Card
19.1.2 CTC Software Installed on the PC or UNIX Workstation
19.2 CTC Installation Overview
19.3 PC and UNIX Workstation Requirements
19.4 ONS 15454 Connections
19.5 CTC Window
19-7
19.5.1 Node View
19-7
19.5.1.1 CTC Card Colors
19.5.1.2 Node View Card Shortcuts
19.5.1.3 Node View Tabs
18-2
18-2
18-3
18-4
18-5
18-6
18-6
18-18
18-18
18-19
18-20
18-22
18-23
18-29
18-31
19-1
19-1
19-3
19-4
19-6
19-7
19-10
19-10
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
18-8
18-10
18-12
18-16
18-24
18-24
18-26
18-28
18-31
18-33
19-1
19-3
Contents
xxiii