Figure 8-6 Ad-1C Card Alarm Profile - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G123 Apply Alarm Profiles to Ports
Figure 8-6
Go to
To apply profiles on a port basis:
Step 3
In card view, click the port row in the Profile column.
a.
Choose the new profile from the drop-down list.
b.
c. Click Apply. Confirm that the profile updated to the port correctly.
Step 4 To apply profiles to all ports on a card:
In card view, click the Force all ports to profile drop-down arrow at the bottom of the window.
a.
Choose the new profile from the drop-down list.
b.
Click Force (still need to "Apply").
c.
Click Apply. Confirm the profile updated to all ports correctly.
d.
In node view, the Port Level Profiles column indicates port-level profiles with a notation such as
"exist (1)".
To reapply a previous alarm profile after you have applied a new one, select the previous profile and
Step 5
click Apply again.
Return to your originating procedure (NTP).
Step 6
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
8-22
AD-1C Card Alarm Profile
Step 3 to apply profiles to a port. Go to Step 4 to apply profiles to all ports on a card.
Chapter 8 Manage Alarms
September 2005