Ntp- G4 Open And Remove The Fmec Cover (Etsi Only) - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 1 Install the Shelf and Common Control Cards
Figure 1-8
Assembly hinge pin
Return to your originating procedure (NTP).
Step 3
NTP-G4 Open and Remove the FMEC Cover (ETSI Only)
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Complete the
Step 2
August 2005
Removing the ONS 15454 ANSI Front Door
Translucent
circles
for LED
viewing
Door hinge
Assembly hinge
"DLP-G11 Open the FMEC Cover" task on page
"DLP-G12 Remove the FMEC Cover" task on page
F A N
F A IL
C R
IT
M A
J
M IN
This procedure opens and removes the FMEC cover on the ONS
15454 ETSI. The ONS 15454 ETSI has a screw-in panel over the EFCA.
The FMEC cover protects the FMEC cards.
Medium slot-head screwdriver
NTP-G2 Install the Shelf Assembly, page 1-8
Required
Onsite
None
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
NTP-G4 Open and Remove the FMEC Cover (ETSI Only)
1-24.
1-25.
1-23