Optical Channel Tab In The Multiplexer/Demultiplexer Card View Performance Window - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G141 View Optical Power Statistics for 32MUX-O, 32-WSS, 32-DMX-O, and 32DMX Cards
Figure 9-3
Card View
Performance
Channel tab
Directions
radio buttons
Intervals
radio buttons
In the Port drop-down list, choose an optical channel to view by selecting the port where you want to
Step 3
view the optical power statistics.
32MUX-O—optical channel receive port (CHAN RX), Ports 01 through 32.
•
• 32WSS—optical channel receive port (ADD RX) Ports 01 through 32, or a pass-through port (PT),
Ports 33 through 64.
32DMX-O and 32DMX—optical channel transmit port (CHAN TX), Ports 01 through 32.
•
Click Refresh. Optical channel power statistics (minimum, maximum, average) for the selected port
Step 4
appear.
Click the Optical Line tab.
Step 5
For a 32WSS card, select the port for which you wish to monitor power statistics (65, 66, 67, 68, or 69).
Step 6
For a 32DMX or 32DMX-O card, accept the default port (33).
Click Refresh. Optical channel power statistics (minimum, maximum, average) for the selected port
Step 7
appear.
Return to your originating procedure (NTP).
Step 8
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
9-14
Optical Channel Tab in the Multiplexer/Demultiplexer Card View Performance
Window
tab
Optical
Signal-type Refresh Auto-refresh
port menu button
Chapter 9 Monitor Performance
Baseline Clear
menu button button
September 2005
Help
button