Figure 1-12 Installing Fmecs On The Ons 15454 Etsi - Cisco ONS 15454 DWDM Installation And Operation Manual

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

Chapter 1
Install the Shelf and Common Control Cards
Step 2
Hold the FMEC by the faceplate.
Slide the FMEC along the guide rails into the desired FMEC slot or slots.
Step 3
Push the FMEC gently into the connector. The ONS 15454 ETSI FMECs plug into electrical connectors
Step 4
on the back panel of the shelf assembly when the screws are tightened.
installation.
Figure 1-12
Mounting screws
Step 5
Tighten the screws.
Step 6
Continue with the
Stop. You have completed this procedure.
August 2005
Installing FMECs on the ONS 15454 ETSI
Guide rail
F A N
F A IL
C R
IT
"NTP-G7 Install the Power and Ground" procedure on page
NTP-G6 Install the MIC-A/P and MIC-T/C/P FMECs (ETSI Only)
M A
J
M IN
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
Figure 1-12
shows FMEC
1-30.
1-29

Advertisement

Table of Contents
loading

Table of Contents