Dlp- G215 Change The 32Wss Card Optical Line Thresholds - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 11 Change DWDM Card Settings
Table 11-24
Parameter
Port
Power Low
(dBm)
Power High
(dBm)
Table 11-25
Table 11-25
Parameter
Port
Power Failure
Low (dBm)
Power Degrade
High (dBm)
Power Degrade
Low (dBm)
Step 6 Return to your originating procedure (NTP).
September 2005
32WSS Optical Channel Warning Threshold Settings
Description
(Display only) Displays the port number. —
Set the low power warning level.
Set the high power warning level.
shows the 32WSS optical line thresholds for alarms.
32WSS Optical Channel Alarm Threshold Settings
Description
(Display only) Displays the port number. —
Shows the power failure low threshold.
This power value applies to the
corresponding port and is automatically
calculated when ANS is run.
You can manually change the threshold.
The value must be within the optical
power range that is specified for the card.
(See Appendix B, "Hardware
Specifications.")
Does not apply to 32WSS cards at the
optical line level.
Does not apply to 32WSS cards at the
optical line level.
DLP-G215 Change the 32WSS Card Optical Line Thresholds
Options
Numeric. Can be set for 15-minute or
one-day intervals. The default is
–50 dBm.
Numeric. Can be set for 15-minute or
one-day intervals. The default is 30 dBm.
Options
Numeric.
—
Numeric
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
11-41