Cisco ONS 15454 DWDM Installation And Operation Manual page 617

Chapter 11 Change DWDM Card Settings
Table 11-17 Multiplexer and Demultiplexer Card Optical Channel Settings (continued)
Parameter Description
VOA Power (32MUX-O, 32DMX-0, 4MD only) The user can
Calib. modify the optical output power to the VOA if
necessary. The VOA power calibration offsets the
VOA power reference.
For demultplexers, you can modify the optical
output power to the client if necessary. For
multiplexers, you can modify the output power per
channel.
This feature is normally used when the Network
Type is configured as Access in the Provisioning >
WDM-ANS tab.
VOA (Display only; 32MUX-O, 32DMX-0, 4MD only)
Attenuation Shows the attenuation value of the VOA when the
Ref. VOA is set in attenuation mode. This parameter can
only be modified by ANS and APC.
VOA (32MUX-O, 32DMX-0, and 4MD only) Allows the
Attenuation user to modify the attenuation value of the VOA if
Calib. necessary when the VOA mode is set for constant
attenuation.
Actual (Display only) Shows the wavelength specified by
Wavelength the manufacturing data. This field cannot be set
manually.
Expected Shows the preprovisioned wavelength. This field is
Wavelength used to preprovsion cards.
Click Apply. If the change affects traffic, a warning message displays. Click Yes to complete the
Step 4
change.
Return to your originating procedure (NTP).
Step 5
September 2005
DLP-G210 Change Optical Channel Settings for Multiplexer and Demultiplexer Cards
Options
Numeric. Double-click the parameter, enter a value
and press Enter.
—
Numeric, double-click the parameter, enter a value and
press Enter.
—
Numeric. Double-click the parameter, enter a value
and press Enter.
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
11-29