Ntp- G68 Create, Download, And Assign Alarm Severity Profiles - Cisco ONS 15454 DWDM Installation And Operation Manual

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

NTP-G68 Create, Download, and Assign Alarm Severity Profiles
Note
Stop. You have completed this procedure.
NTP-G68 Create, Download, and Assign Alarm Severity Profiles
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
profile. If you are already logged in, continue with
or go to
Step 2
Complete the
clones a current alarm profile, renames the profile, and customizes the new profile.
Complete the
Step 3
an alarm severity profile from a CD or a node.
Note
As necessary, complete the
Step 4
"DLP-G124 Apply Alarm Profiles to Cards and Nodes" task on page
As necessary, complete the
Step 5
Stop. You have completed this procedure.
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
8-16
A blank LCD results when the fuse on the alarm interface panel (AIP) board has blown. If this
occurs, contact the Cisco Technical Assistance Center (TAC). See the
Assistance" section on page
Use this procedure to create a customized alarm profile at the network,
node, or card level. This procedure also provides links to tasks that
describe how to assign custom severities individually to each port, card, or
node, and to delete alarm profiles.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-G46 Log into CTC" task on page 2-25
Step 3
to download an alarm profile.
"DLP-G121 Create a New or Cloned Alarm Severity Profile" task on page
"DLP-G122 Download an Alarm Severity Profile" task on page
After storing a created or downloaded alarm profile, you must go to the node (either by logging
into it or clicking on it from the network view) and activate the profile by applying it to the shelf,
one or more cards, or one or more ports.
"DLP-G123 Apply Alarm Profiles to Ports" task on page 8-21
"DLP-G125 Delete Alarm Severity Profiles" task on page
lxxvi.
at the node where you want to create an alarm
Step 2
to create, clone, or modify an alarm profile,
Chapter 8
Manage Alarms
"Obtaining Technical
8-17. This task
8-20. This task downloads
or the
8-23.
8-23.
September 2005

Advertisement

Table of Contents
loading

Table of Contents