Dlp- G196 Log Out A User On Multiple Nodes - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G196 Log Out a User on Multiple Nodes
DLP-G196 Log Out a User on Multiple Nodes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 From the View menu, chose Go to Network View.
Step 2 Click the Provisioning > Security > Active Logins tabs.
Choose the user that you want to log out.
Step 3
Click Logout.
Step 4
In the Logout User dialog box, check the nodes where you want to log out the user.
Step 5
Check Lockout before Logout if you want to lock the user out prior to logout. This prevents the user
Step 6
from logging in after logout based on user lockout parameters provisioned in the Policy tab. A manual
unlock by a Superuser is required, or else the user is locked out for the amount of time specified in the
Lockout Duration field. See the
page 10-47
Step 7 In the Select Applicable Nodes area, uncheck any nodes where you do not want to change the user's
settings (all network nodes are selected by default).
Step 8 Click OK.
Step 9 Click OK in the confirmation dialog box.
Step 10 Return to your originating procedure (NTP).
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
10-54
This task logs out a user from multiple nodes.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Superuser
"DLP-G189 Change Security Policy for Multiple Nodes" task on
for more information.
Chapter 10 Manage the Node
September 2005