Cisco ONS 15454 DWDM Installation And Operation Manual page 380

DLP-G303 Provision the MXP_2.5G_10G and MXP_2.5G_10E Trunk Port Alarm and TCA Thresholds
Step 4 Referring to
Low, TX Power High, and TX Power Low.
Note
Click Apply.
Step 5
Table 5-21
Card
MXP_2.5G_10G –22 dBm
MXP_2.5G_10E –18 dBm
Under Types, click the Alarm radio button and click Refresh.
Step 6
Referring to
Step 7
RX Power Low, TX Power High, and TX Power Low.
Note
Table 5-22
Card
MXP_2.5G_10G –24 dBm
MXP_2.5G_10E –20 dBm
Click Apply.
Step 8
Step 9 Return to your originating procedure (NTP).
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
5-42
Table 5-21, provision the trunk port (Port 5) TCA thresholds for RX Power High, RX Power
Do not modify the Laser Bias parameters.
MXP_2.5G_10G and MXP_2.5G_10E Trunk Port TCA Thresholds
TCA RX TCA RX
Power Low Power High
–8 dBm
–9 dBm
Table 5-22, provision the trunk port (Port 5) Alarm thresholds for RX Power High,
You must modify 15 Min and 1 Day independently. To do so, choose the appropriate radio button
and click Refresh.
MXP_2.5G_10G and MXP_2.5G_10E Trunk Port Alarm Thresholds
Alarm RX Alarm RX
Power Low Power High
–8 dBm
–8 dBm
Chapter 5 Provision Transponder and Muxponder Cards
TCA TX TCA TX
Power Low Power High
–1 dBm 7 dBm
0 dBm 9 dBm
Alarm TX Alarm TX
Power Low Power High
2 dBm 4 dBm
3 dBm 7 dBm
September 2005