Link State Database - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual

Link State Database

Use the OSPF Link State Database page to display OSPF link state information.
To display the Link State Database page, click Routing
Database.
Table 35.
Field
Router ID
Area ID
LSA Type
 
OSPF Advanced
Description
The 32-bit integer in dotted decimal format that
uniquely identifies the router within the autonomous
system (AS). The Router ID is set on the IP
Configuration page. If you want to change the Router
ID you must first disable OSPF. After you set the new
Router ID, you must re-enable OSPF to have the
change take effect. The default value is 0.0.0.0,
although this is not a valid Router ID.
The ID of an OSPF area to which one of the router
interfaces is connected. An Area ID is a 32 bit integer
in dotted decimal format that uniquely identifies the
area to which an interface is connected.
The format and function of the link state
advertisement. One of the following:
•
Router Links
•
Network Links
•
Network Summary
•
ASBR Summary
• AS-external

Link State
Chapter 4. Routing | 291