Lacp Actor Admin State Individual; Lacp Actor Admin State Longtimeout - NETGEAR GSM7228PS Cli Manual

lacp actor admin state individual

Use this command to set LACP actor admin state to individual.
Format
lacp actor admin state individual
Mode Interface Config
Note: This command is only applicable to physical interfaces.
no lacp actor admin state individual
Use this command to set the LACP actor admin state to aggregation.
Format
no lacp actor admin state individual
Mode Interface Config

lacp actor admin state longtimeout

Use this command to set LACP actor admin state to longtimeout.
Format
lacp actor admin state longtimeout
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-95