Config Macfilter Deldest; Spanning Tree Commands - NETGEAR GSM7324 Reference Manual

If all is selected, all ports will be added to the destination port filter set.
Format

config macfilter deldest

This command removes a port from the destination filter set for the MAC filter with the given
<macaddr> and VLAN of <vlan>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlan> parameter must identify a valid VLAN.
The <slot.port> parameter identifies the destination port to be removed from the destination port
filter set for the MAC filter.
If all is selected, all ports will be removed from the destination port filter set.
Format

Spanning Tree Commands

This section provides detailed explanation of the spanning tree commands. The commands are
divided into two functional groups:
• Show commands display spanning tree settings, statistics, and other information.
• Config commands configure features and options of the switch. For every config command
there is a show command that displays the config setting.
This section is organized by configuration type:
• System information and statistics commands
• Bridge and CIST commands
• MSTI commands
• Modified commands
• Obsolete commands
Switching Commands
7000 Series L3 Managed Switch Reference Manual for Software v1.0
config macfilter adddest <macaddr> <vlan>
<slot.port|all>
config macfilter deldest <macaddr> <vlan>
<slot.port|all>
May 30, 2003 Beta Draft
7-49