no private-group name
This command is used to remove the specified private group.
Format
private-group name <privategroup-name>
Mode
Global Config
show private-group
This command displays the private groups' information.
Format
show private-groupname [<private-group-name>|<private-group-
id>|port <unit/slot/port>]
Mode
Priviledged EXEC
Term
Definition
Interface
Valid slot and port number separated by forward slashes.
The VLAN ID associated with the port
Port VLANID
Private Group
Total number of private groups is 192.
ID
Private Group
The name string can be up to 24 bytes of non-blank characters
Name
Private Group
The mode can be either "isolated" or "community".
GARP Commands
This section describes the commands you use to configure Generic Attribute Registration Protocol
(GARP) and view GARP status. The commands in this section affect both GARP VLAN
Registration Protocol (GVRP) and Garp Multicast Registration Protocol (GMRP). GARP is a
protocol that allows client stations to register with the switch for membership in VLANS (by using
GVMP) or multicast groups (by using GVMP).
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
.
v1.0, July 2010
3-56