GS700TS Series Smart Switch Software User Manual
•
Broadcast Packets – Displays the number of good broadcast packets received on the
interface since the device was last refreshed. This number does not include multicast
packets.
•
Multicast Packets – Displays the number of good multicast packets received on the
interface since the device was last refreshed.
•
CRC Align Errors – Displays the number of CRC Align errors that have occurred on the
interface since the device was last refreshed.
•
Undersize Packets – Displays the number of undersized packets (less than 64 octets)
received on the interface since the device was last refreshed.
•
Oversize Packets – Displays the number of oversized packets (over 1518 octets) received
on the interface since the device was last refreshed.
•
Fragments – Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
•
Jabbers – Displays the total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range to detect jabbers is
between 20 ms and 150 ms.
•
Collisions – Displays the number of collisions received on the interface since the device
was last refreshed.
•
Utilization – Displays the percentage of the interface utilized.
2. Select a history entry number.
3. Click
. The RMON history table is displayed.
Defining RMON Events
This section includes the following topics:
•
Defining RMON Events Controll
•
Viewing the RMON Events Logs
5-142
Configuring The Device Using Your Browser
v1.0, November 2006