File Management - NETGEAR Prosafe GS700TP Software Administration Manual
Smart switch
Hide thumbs
Also See for Prosafe GS700TP:
- Software administration manual (251 pages) ,
- Software user manual (184 pages) ,
- Installation manual (41 pages)
Table of Contents
Advertisement
GS700TP Smart Switch Software Administration Manual
•
File Type – Enter the file type to be downloaded. The possible field values are:
–
Firmware – Download the Firmware file.
–
Boot File – Download the Boot file.
–
Configuration – Download the Configuration file.
•
via TFTP – Select to download the file from the TFTP Server.
•
via HTTP – Select to download the file via the web browser interface (HTTP) and enter
the file name in the provided box.
•
TFTP Server IP – Enter the TFTP Server IP Address from which the Firmware, Boot or
Configuration file is downloaded.
•
Remote Filename – Enter the destination file name to be downloaded.
2. Select Firmware, Boot File or Configuration as the download File Type from the provided
field.
3. Select whether to download via TFTP or via HTTP.
4. If you selected via HTTP, enter the file name in the provided box.
5. If you selected via TFTP, enter the TFTP Server IP address in the provided field.
6. If you selected via TFTP, enter the Remote Filename in the provided field.
7. Click APPLY to download the file. You must reboot the device for the downloaded file
settings to take effect. See
File Management
The File Management menu contains the following option:
•
"Active Image"
Active Image
The Active Image screen enables the user to select which image will be set as active after the next
reset.
Maintenance
"Device Reboot"
for detailed instructions on rebooting the device.
v1.0, April 2008
8-5
Advertisement
Table of Contents
