Show Interface Ethernet - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

18.1.5 show interface ethernet

This command displays detailed statistics for a specific interface or for all CPU traffic
based upon the argument.
Format
Mode
The display parameters, when the argument is
Packets
Received
18-6
show interface ethernet {<slot/port> | switchport}
Privileged EXEC
<slot/port>
Octets Received - The total number of octets of data (includ-
ing those in bad packets) received on the network (excluding
framing bits but including Frame Check Sequence (FCS)
octets). This object can be used as a reasonable estimate of
Ethernet utilization. If greater precision is desired, the ether-
StatsPkts and etherStatsOctets objects should be sampled
before and after a common interval. The result of this equa-
tion is the value Utilization which is the percent utilization of
the Ethernet segment on a scale of 0 to 100 percent.
Packets Received < 64 Octets - The total number of packets
(including bad packets) received that were < 64 octets in
length (excluding framing bits but including FCS octets).
Packets Received 64 Octets - The total number of packets
(including bad packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).
Packets Received 65-127 Octets - The total number of pack-
ets (including bad packets) received that were between 65
and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets Received 128-255 Octets - The total number of
packets (including bad packets) received that were between
128 and 255 octets in length inclusive (excluding framing
bits but including FCS octets).
Packets Received 256-511 Octets - The total number of
packets (including bad packets) received that were between
256 and 511 octets in length inclusive (excluding framing bits
but including FCS octets).
Packets Received 512-1023 Octets - The total number of
packets (including bad packets) received that were between
v1.0, December 2005
, are as follows:
System Maintenance Commands