Show Interface Ethernet - NETGEAR ProSafe GSM7228PS Cli Manual

Term Definition
Address Entries The total number of Forwarding Database Address Table entries now active on the
Currently In Use
switch, including learned and static entries.
VLAN Entries The number of VLAN entries presently occupying the VLAN table.
Currently In Use
Time Since The elapsed time, in days, hours, minutes, and seconds since the statistics for this switch
Counters Last
were last cleared.
Cleared

show interface ethernet

This command displays detailed statistics for a specific interface or for all CPU traffic based upon
the argument.
Format
show interface ethernet {<unit/slot/port> | switchport}
Mode Privileged EXEC
When you specify a value for <unit/slot/port>, the command displays the following
information.
Term Definition
Total Packets
The total number of octets of data received by the processor (excluding framing bits but
Received
including FCS octets).
(Octets)
Packets The total number of packets (including broadcast packets and multicast packets) received
Received
by the processor.
Without Error
Unicast Packets The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Received
Multicast The total number of packets received that were directed to a multicast address. Note that
Packets
this number does not include packets directed to the broadcast address.
Received
Broadcast The total number of packets received that were directed to the broadcast address. Note
Packets
that this does not include multicast packets.
Received
Receive Packets The number of inbound packets which were chosen to be discarded even though no
Discarded
errors had been detected to prevent their being deliverable to a higher-layer protocol. A
possible reason for discarding a packet could be to free up buffer space.
Utility Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
7-10