Pre-Login Banner And System Prompt Commands; Copy; Set Prompt - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual
Layer-3 stackable switches, software version 7.3
Hide thumbs
Also See for GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch:
- Cli manual (787 pages) ,
- Hardware installation manual (42 pages) ,
- Administration manual (561 pages)
Table of Contents
Advertisement
Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
4.2 Pre-login Banner and System Prompt Commands
This section describes the commands you use configure the pre-login banner and the
system prompt. The pre-login banner is the text that displays before you login at the
prompt.
4.2.1 copy
The
command includes the option to upload or download the CLI Banner to or from
copy
the switch. You can specify local URLs by using TFTP, Xmodem, Ymodem, or Zmodem.
Default
Format
Mode
4.2.2 set prompt
This command changes the name of the prompt. The length of name may be up to 64
alphanumeric characters.
Format
Mode
4-10
none
<Code Sample Variable><tftp://<ipaddr>/<filepath>/
copy
<filename>><Code Sample Variable>
copy nvram:clibanner
<ipaddr>/<filepath>/<filename>><Code Sample Variable>
Privileged EXEC
set prompt <prompt_string>
Privileged EXEC
v4.1, October 2008
nvram:clibanner
<Code Sample Variable><tftp://
Port and System Setup Commands
User:
Advertisement
Chapters
Table of Contents
