Manual Transmission Unit (4Wd) Removal - Toyota T100 1996 Service Manual

MANUAL TRANSMISSION (R150, R150F)
Cloth
Select Return Spring
Tip of Shift Lever
1996 TOYOTA T100 (RM449U)
REMOVAL
Down
1.
(a)
(b)
(c)
(d)
Counterclockwise
(e)
HINT:
MT0501
At the time of installation, please refer to the following item.
Apply MP grease to the tip of the shift lever.
2.
Installation
Using snap ring pliers, remove the snap ring and pull out the
shift lever.
Front
HINT:
At the time of installation, please refer to the following item.
Apply MP grease to the tip of shift lever.
3.
Q06817
4.
5.
6.
7.
Remove the 4 bolts, release cylinder and line.
− MANUAL TRANSMISSION UNIT (4WD)
REMOVE TRANSMISSION SHIFT LEVER
Remove the 4 screws and front console box.
Remove the 4 screws and shift lever boot retainer.
Cover the shift lever cap with a cloth.
Then, pressing down on the shift lever cap, rotate it coun-
terclockwise to remove.
Pull out the shift lever.
REMOVE TRANSFER SHIFT LEVER
RAISE VEHICLE AND DRAIN TRANSMISSION OIL
Oil grade: API GL−4 or GL−5
Viscosity: SAE 75W−90
Capacity: 2.2 liters (2.3 US qts, 1.9 Imp. qts)
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
REMOVE FRONT AND REAR PROPELLER SHAFTS
(See page PR−10)
DISCONNECT SPEEDOMETER CABLE
DISCONNECT BACK−UP LIGHT SWITCH AND 4WD
INDICATOR SWITCH CONNECTORS
DISCONNECT CLUTCH RELEASE CYLINDER AND
LINE
Torque: 12 N·m (120 kgf·cm, 9 ft·lbf)
MT−7
MT04O−02