Vsv For Evaporative Emission (Evap) Inspection - Toyota T100 1996 Service Manual

1996 TOYOTA T100 (RM449U)
MFI (3RZ−FE) − VSV FOR EVAPORATIVE EMISSION (EVAP)
VSV FOR EVAPORATIVE
EMISSION (EVAP)
INSPECTION
1. INSPECT VSV FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between the
terminals.
Resistance: 30 − 34 Ω at 20°C (68°F)
If there is no continuity, replace the VSV.
P15774
2. INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between
each terminal and the body.
If there is continuity, replace the VSV.
P15773
3. INSPECT VSV OPERATION
(a) Check that air does not flow from pipe E to pipe F.
P15772
(b) Apply battery voltage across the terminals.
(c) Check that air flows from pipe E to pipe F.
If operation is not as specified, replace the VSV.
P15771
Author : Date :
MF−43
SF0BE−01
995