Toyota T100 1996 Service Manual page 880

EM−52
Recessed Head Bolt
Front
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (5VZ−FE)
3.
(a)
(b)
8 mm Hexagon
Wrench
4.
Install the bolt, and connect the ground strap.
Z14658
5.
(a)
NOTICE:
Be careful not to damage the camshaft.
(b)
HINT:
P21041
Attach the pins on the gears to the gear spring ends.
(c)
P21037
− CYLINDER HEAD
INSTALL RECESSED HEAD CYLINDER HEAD BOLTS
Apply a light coat of engine oil on the threads and under
the heads of the cylinder head bolts.
Using an 8 mm hexagon wrench, install the cylinder head
bolt on each cylinder head, then repeat for the other side,
as shown.
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
CONNECT GROUND STRAP
ASSEMBLE EXHAUST CAMSHAFTS
Mount the hexagonal wrench head portion of the cam-
shaft in a vise.
Install these parts:
(1) Camshaft gear spring
(2) Camshaft sub−gear
(3) Wave washer
Using snap ring pliers, install the snap ring.