Toyota T100 1996 Service Manual page 1403

B
1996 TOYOTA T100 (RM449U)
AUTOMATIC TRANSMISSION
9.
(a)
(b)
10.
11.
12.
Q04688
13.
14.
15.
16.
A
(a)
(b)
C
17.
Z18883
(a)
(b)
18.
(a)
(b)
(c)
19.
20.
Q06800
− AUTOMATIC TRANSMISSION UNIT (A340F)
DISCONNECT SPEEDOMETER CABLE
Loosen the serrated collar with pliers. Do not lose the felt
dust protector and washer.
Disconnect the cable.
DISCONNECT NO.2 VEHICLE SPEED SENSOR CON-
NECTOR
DISCONNECT SOLENOID CONNECTOR
DISCONNECT TRANSFER NEUTRAL POSITION
SWITCH
DISCONNECT TRANSFER L4 POSITION SWITCH
DISCONNECT TRANSFER INDICATOR SWITCH
SEPARATE WIRE HARNESS FROM TRANSMISSION
AND TRANSFER
REMOVE CROSS SHAFT
Remove the clip and disconnect the No.2 gear shifting
rod.
Remove the nut, washer, 4 bolts and the cross shaft.
Torque:
A (Transmission side): 13 N·m (130 kgf·cm, 9 ft·lbf)
B (Frame side): 28 N·m (290 kgf·cm, 21 ft·lbf)
C (Nut): 13 N·m (130 kgf·cm, 9 ft·lbf)
DISCONNECT STARTER WIRE
Remove the nut and disconnect the starter wire.
Disconnect the starter connector.
REMOVE OIL COOLER PIPE
Remove the bolt and front side oil cooler pipe clamp.
Remove the bolt and rear side oil cooler pipe clamp.
Disconnect the 2 oil cooler pipes.
Torque: 34 N·m (350 kgf·cm, 25 ft·lbf)
DISCONNECT ATF TEMPERATURE SENSOR CON-
NECTOR
DISCONNECT PARK/NEUTRAL POSITION SWITCH
CONNECTOR
AT−35