Toyota T100 1996 Service Manual page 1611

SST
SST
1996 TOYOTA T100 (RM449U)
SUSPENSION AND AXLE
6.
SST
(a)
(b)
SA2349
(c)
SST
R11391
7.
Using SST, remove the oil seal from the differential carrier.
SA2348
8.
(a)
(b)
Z00641
9.
(a)
Matchmarks
(b)
R04324
− REAR DIFFERENTIAL CARRIER
REMOVE COMPANION FLANGE
Using a chisel and hammer, unstake the staked part of the
nut.
Using SST to hold the flange, remove the nut.
SST 09330−00021
Using SST, remove the companion flange.
SST 09950−30010
REMOVE FRONT OIL SEAL
SST 09308−10010
REMOVE FRONT BEARING AND BEARING SPECER
Using SST, remove the bearing from the drive pinion.
SST 09556−22010
Remove the 2 washers and bearing spacer. If the front
bearing is damaged or worn, replace the bearing.
REMOVE DIFFERENTIAL CASE
Place matchmarks on the bearing cap and differential car-
rier.
Remove the 4 bolts and bearing cap.
SA−141