EM−48
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (5VZ−FE)
24.
(a)
(b)
NOTICE:
Do not scratch or damage the joint of the cylinder head cov-
er.
P20843
(c)
P20987
(d)
(e)
(f)
P24420
−
CYLINDER HEAD
IF NECESSARY, REPLACE SPARK PLUG TUBE GAS-
KETS
Bend up the tab on the ventilation baffle plate which pre-
vents the gasket from the slipping out.
Using a screwdriver and hammer, tap out the gasket.
Using needle−nose pliers, pry out the gasket.
Using a 32 mm socket wrench and hammer, tap in a new
gasket until its surface is flush with the upper edge of the
cylinder head cover.
Apply a light coat of MP grease to the gasket lip.
Return the ventilation plate tab to its original position.