Clutch Unit Inspection - Toyota T100 1996 Service Manual

SST
1996 TOYOTA T100 (RM449U)
CLUTCH − CLUTCH UNIT
INSPECTION
1. INSPECT CLUTCH DISC FOR WEAR OR DAMAGE
Using calipers, measure the rivet head depth.
Minimum rivet depth: 0.3 mm (0.012 in.)
If necessary, replace the clutch disc.
CL0239
2. INSPECT CLUTCH DISC RUNOUT
Using a dial indicator, check the disc runout.
Maximum runout: 0.8 mm (0.031 in.)
If necessary, replace the clutch disc.
CL0373
3. INSPECT FLYWHEEL RUNOUT
Using a dial indicator, check the flywheel runout.
Maximum runout: 0.1 mm (0.004 in.)
If necessary, replace the flywheel.
Q07250
4. INSPECT PILOT BEARING
Turn the bearing by hand while applying force in the rotation
direction.
If the bearing sticks or has much resistance, replace the pilot
bearing.
HINT:
The bearing is permanently lubricated and requires no clearing
or lubrication.
Q02481
5. IF NECESSARY, REPLACE PILOT BEARING
(a) Using SST, remove the pilot bearing.
SST
Q02482
09303−35011
CL−17
CL02K−04