1996 TOYOTA T100 (RM449U)
BRAKE
−
FRONT BRAKE CALIPER (2WD)
REMOVAL
1.
DISCONNECT FLEXIBLE HOSE
(a)
Remove the union bolt and disconnect the flexible hose.
Torque: 15 N·m (155 kgf·cm, 11 ft·lbf)
NOTICE:
At the time of installation, please refer to the following item.
For correct brake hose routing, ensure that the hose hangs
down before installing hose to caliper.
(b)
Use a container to catch the brake fluid.
R04699
2.
REMOVE CALIPER FROM TORQUE PLATE
Remove the 2 installation bolts and caliper.
Torque:
1 ton: 39 N·m (400 kgf·cm, 29 ft·lbf)
Torque:
0.5 ton: 36 N·m (370 kgf·cm, 27 ft·lbf)
3.
REMOVE THESE PARTS:
1 ton:
S
2 anti−squeal springs
2 brake pads with anti−squeal shims
S
4 pads support plates
S
BR−27
BR098−03