Toyota T100 1996 Service Manual page 1765

SR−58
SST
SST
Matchmarks
1996 TOYOTA T100 (RM449U)
STEERING
(b) Using a spanner to hold the steering rack steady, and us-
ing SST, remove the rack end.
SST
NOTICE:
Use SST 09922−10010 in the direction shown in the il-
S
lustration.
Mark the RH and LH rack ends.
S
SST
Z14296
6. REMOVE RACK GUIDE SPRING CAP LOCK NUT
Using SST, remove the nut.
SST
NOTICE:
Use SST 09922−10010 in the direction shown in the illustra-
tion.
7. REMOVE RACK GUIDE SPRING CAP
Using a hexagon wrench (21 mm), remove the cap.
8. REMOVE RACK GUIDE SPRING AND RACK GUIDE
R11782
9. REMOVE RACK HOUSING CAP
10. REMOVE SELF−LOCKING NUT
Using SST to stop the control valve assembly rotating, remove
the nut.
SST
R04590
11. REMOVE DUST COVER
12. REMOVE CONTROL VALVE HOUSING WITH
CONTROL VALVE ASSEMBLY
(a) Place matchmarks on the valve housing and rack hous-
ing.
(b) Remove the 2 bolts.
(c) Pull out the control valve assembly with the valve hous-
ing.
(d) Remove the gasket from the rack housing.
R04593
− POWER STEERING GEAR (2WD)
09922−10010
09922−10010
09616−00010