Toyota T100 1996 Service Manual page 1570

SA−100
1996 TOYOTA T100 (RM449U)
SUSPENSION AND AXLE
REMOVAL
1. REMOVE FRONT WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
2. REMOVE ENGINE UNDER COVER
3. REMOVE TORSION BAR SPRING (See page SA−83)
4. DISCONNECT SHOCK ABSORBER FROM LOWER
SUSPENSION ARM (See page SA−73)
5. DISCONNECT STABILIZER BAR FROM LOWER
SUSPENSION ARM (See page SA−124)
6. DISCONNECT STRUT BAR FROM LOWER
SUSPENSION ARM (See page SA−89)
7. DISCONNECT LOWER BALL JOINT FROM LOWER
SUSPENSION ARM (See page SA−116)
8. REMOVE LOWER SUSPENSION ARM
Remove the nut and lower suspension arm.
Torque: 206 N·m (2,100 kgf·cm, 152 ft·lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nut.
FA1600
− FRONT LOWER SUSPENSION ARM (2WD)
SA0H4−01