Toyota T100 1996 Service Manual page 1204

Terminal C
Ammeter
Terminal 30
1996 TOYOTA T100 (RM449U)
STARTING (3RZ−FE)
TEST
Terminal 50
NOTICE:
These tests must be done within 3 to 5 seconds to avoid
burning out the coil.
1.
(a)
(b)
Battery
P14894
2.
With battery connected as above with the clutch pinion gear
out, disconnect the negative (−) lead from terminal C. Check
that the pinion gear remains out.
P14895
3.
Disconnect the negative (−) lead from the switch body.
Check that the clutch pinion gear returns inward.
P14896
4.
(a)
(b)
Battery
P14897
− STARTER
DO PULL−IN TEST
Disconnect the field coil lead wire from terminal C.
Connect the battery to the magnetic switch as shown.
Check that the clutch pinion gear moves outward.
DO HOLD−IN TEST
INSPECT CLUTCH PINION GEAR RETURN
DO NO−LOAD PERFORMANCE TEST
Connect the battery and ammeter to the starter as shown.
Check that the starter rotates smoothly and steadily with
the pinion gear moving out. Check that the ammeter
reads the specified current.
Specified current:
1.2 kW, 1.4 kW type
90 A or less at 11.5 V
1.8 kW, 2.0 kW type
100 A or less at 11.5 V
ST−15
ST032−02