Toyota T100 1996 Service Manual page 1743

SR−36
1996 TOYOTA T100 (RM449U)
STEERING − POWER STEERING VANE PUMP (3RZ−FE)
REMOVAL
1. REMOVE DRIVE BELT
(a) Loosen the power steering idle pulley set bolt.
(b) Loosen the belt adjusting bolt.
R09245
2. DISCONNECT PRESSURE FEED TUBE
Using a spanner (24 mm) to hold the pressure port union, re-
move the union bolt and the 2 gaskets.
3. DISCONNECT RETURN HOSE
NOTICE:
Take care not to spill fluid on the drive belt.
4. REMOVE PS VANE PUMP ASSEMBLY
Remove the 2 pump assembly set bolts.
R13844
SR07J−01