Toyota T100 1996 Service Manual page 1491

1996 TOYOTA T100 (RM449U)
SUSPENSION AND AXLE
(f) Using a dial indicator, measure the hub bearing backlash.
Maximum: 0.05 mm (0.0020 in.)
9. INSTALL LOCK CAP, COTTER PIN AND GREASE CAP
(a) Install the lock cap and a new cotter pin.
(b) Install the grease cap.
10. INSTALL BRAKE CALIPER
Install the 2 brake caliper set bolts.
Torque: 108 N·m (1,100 kgf·cm, 80 ft·lbf)
11. w/ ABS:
R04258
CONNECT ABS SPEED SENSOR TO STEERING
KNUCKLE
Torque: 8.0 N·m (82 kgf·cm, 71 in.·lbf)
12. INSTALL FRONT WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
13. CHECK FRONT WHEEL ALIGNMENT
(See page SA−7)
14. w/ ABS:
CHECK ABS SPEED SENSOR SIGNAL
(See page DI−321)
− FRONT AXLE HUB (2WD)
SA−21