Toyota T100 1996 Service Manual page 1359

MT−34
Socket Wrench
1996 TOYOTA T100 (RM449U)
MANUAL TRANSMISSION (W59)
REPLACEMENT
1.
SST
(a)
(b)
(c)
WM0073
(d)
SST
Q06319
(e)
Socket Wrench
RM0013
(f)
D00876
(g)
2.
(a)
(b)
HINT:
Engage the roller cages.
WM0079
− COUNTER GEAR AND REVERSE IDLER GEAR
IF NECESSARY, REPLACE COUNTER GEAR FRONT
BEARING AND SIDE RACE
Using a snap ring expander, remove the snap ring.
Using SST and a press, press out the bearing.
SST 09950−00020
Check the side race for wear or damage.
If necessary, remove the side race.
Using SST and a socket wrench, remove the side race.
SST 09950−40010
Using a socket wrench and press, install a new bearing,
side race and inner race.
Select a snap ring that allows the minimum axial play.
Mark
A
B
C
D
E
F
Using a snap ring expander, install the snap ring.
IF NECESSARY, REPLACE COUNTER GEAR CENTER
BEARING
Remove the bearing from the counter gear.
Install a new bearing on the counter gear.
Thickness mm (in.)
2.05 − 2.10 (0.0807 − 0.0827)
2.10 − 2.15 (0.0827 − 0.0846)
2.15 − 2.20 (0.0846 − 0.0866)
2.20 − 2.25 (0.0866 − 0.0886)
2.25 − 2.30 (0.0886 − 0.0906)
2.30 − 2.35 (0.0906 − 0.0925)
MT03Z−01