Toyota T100 1996 Service Manual page 1236

CH−12
SST
SST
1996 TOYOTA T100 (RM449U)
CHARGING (3RZ−FE)
10. INSPECT FRONT BEARING
Check that the bearing is not rough or worn.
11. IF NECESSARY, REPLACE FRONT BEARING
(a) Remove the 4 screws and bearing retainer.
CH0827
(b) Using SST and a press, press out the bearing.
SST
P22368
(c) Using SST and a press, press in a new bearing.
SST
SST
(d) Install the bearing retainer with the 4 screws.
Torque: 2.6 N·m (27 kgf·cm, 23 in.·lbf)
P22369
12. INSPECT REAR BEARING
Check that the bearing is not rough or worn.
13. IF NECESSARY, REPLACE REAR BEARING
(a) Using SST, remove the bearing cover and bearing.
SST
(b) Remove the bearing cover (inside).
N00581
− GENERATOR
09950−60010 (09951−00260, 09952−06010)
09950−60010 (09951−00500)
09820−00021