Toyota T100 1996 Service Manual page 825

EM−102
Oil Pressure Switch
Knock
Sensor
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (3RZ−FE)
(b)
21.
(a)
SST
(b)
P15971
22.
(a)
(b)
23.
(a)
(b)
24.
Install the bolt and water bypass pipe.
25.
Using SST, install the knock sensor.
SST
26.
Install the 2 bolts and fuel filter.
27.
P14816
28.
29.
− CYLINDER BLOCK
Using SST, install the oil pressure switch.
SST 09816−30010
INSTALL ENGINE COOLANT DRAIN PLUG
Apply adhesive to 2 or 3 threads of the engine coolant
drain plug.
Adhesive:
Part No. 08833−00080, THREE BOND 1344,
LOCTITE 242 or equivalent
Install the engine coolant drain plug.
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
INSTALL OIL FILTER BRACKET UNION
Install a new O−ring.
Using 14 mm hexagon wrench, install the oil filter bracket
union.
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
INSTALL OIL FILTER AND BRACKET
Install a new O−ring and oil filter bracket with the 2 bolts
and nut.
Torque: 28 N·m (290 kgf·cm, 21 ft·lbf)
Install the oil filter (See page LU−3).
INSTALL WATER BYPASS PIPE
Torque: 20 N·m (200 kgf·cm, 14 ft·lbf)
INSTALL KNOCK SENSOR
SST 09816−30010
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
INSTALL FUEL FILTER
Torque: 20 N·m (200 kgf·cm, 14 ft·lbf)
INSTALL TIMING CHAINS, GEARS AND SPROCKETS
(See page EM−20)
INSTALL CYLINDER HEAD (See page EM−50)
REMOVE ENGINE STAND