Toyota T100 1996 Service Manual page 1697

BR−60
1996 TOYOTA T100 (RM449U)
BRAKE − ABS ACTUATOR
(d) Push the REAR switch while pressing the POWER
SWITCH, and check that the brake pedal cannot be de-
pressed.
NOTICE:
Do not keep the POWER SWITCH pushed down for more
than 10 seconds.
(e) Release the REAR switch then the POWER SWITCH,
and check that the brake pedal can be depressed.
R07783
(f) Push and hold in the MOTOR switch for a few seconds,
and check that the pedal returns.
(g) Release the brake pedal.
R07784
(h) Push and hold in the MOTOR switch for a few seconds.
(i) Depress the brake pedal and hold it for about 15 seconds.
As you hold the pedal down, push the MOTOR switch for
a few seconds. Check that the brake pedal does not pul-
sate.
(j) Release the brake pedal.
R07785
7. PUSH MOTOR SWITCH
(a) Push and hold on the MOTOR switch for a few seconds.
(b) Stop the engine.
8. DISCONNECT ACTUATOR CHECKER (SST) FROM
ACTUATOR
Remove the "SHEET L" (SST) and disconnect the actuator
checker (SST) and sub−wire harness (SST) from the actuator,
control relay and body side wire harness.
SST 09990−00150, 09990−00200, 09990−00210,
R07782
09990−00370
9. CONNECT CONNECTOR TO ACTUATOR
10. CLEAR DTC (See page DI−321)
Author : Date :
1665