Toyota T100 1996 Service Manual page 1248

CH−6
Pivot Bolt
Lock Nut
Pivot Bolt
Lock Nut
1996 TOYOTA T100 (RM449U)
CHARGING (5VZ−FE)
REMOVAL
1.
(a)
(b)
Adjusting Bolt
P20342
2.
(a)
(b)
3.
(a)
(b)
P20342
− GENERATOR
DISCONNECT WIRING FROM GENERATOR
Disconnect the connector from the generator.
Remove the nut and disconnect the wire from the genera-
tor.
REMOVE GENERATOR DRIVE BELT
Loosen the adjust lock nut, adjusting bolt and pivot bolt.
Remove the drive belt.
REMOVE GENERATOR
Remove the pivot bolt and adjusting lock nut.
Remove the generator.
Torque:
Pivot bolt: 51.0 N·m (520kgf·cm, 38 ft·lbf)
Lock Nut: 18.5 N·m (185kgf·cm, 14 ft·lbf)
CH0HY−01