Toyota T100 1996 Service Manual page 1193

ST−4
(5)
(2)
(4)
1996 TOYOTA T100 (RM449U)
STARTING (3RZ−FE)
DISASSEMBLY
1.
(a)
P14884
(b)
P14885
(c)
NOTICE:
At the time of notice, please refer to the following items.
Align the protrusion of the field frame with cutout of the
magnetic switch.
(d)
HINT:
At the time of assembly, please refer to the following items.
P14893
Use a new O−ring.
2.
(a)
P14886
(b)
(1)
(3)
P14887
− STARTER
REMOVE FIELD FRAME AND ARMATURE
Remove the nut, and disconnect the lead wire from the
magnetic switch terminal.
Torque: 5.9 N·m (60 kgf·cm, 52 in.·lbf)
Remove the 2 through bolts.
Torque:
1.2 kW, 1.4 kW type: 5.9 N·m (60 kgf·cm, 52 in.·lbf)
1.8 kW, 2.0 kW type: 9.3 N·m (95 kgf·cm, 82 in.·lbf)
Pull out the field frame with the armature from the magnet-
ic switch assembly.
Remove the O−ring.
REMOVE STARTER HOUSING, CLUTCH
ASSEMBLY AND GEAR
Remove the 2 screws.
Torque:
1.2 kW, 1.4 kW type: 5.9 N·m (60 kgf·cm, 52 in.·lbf)
1.8 kW, 2.0 kW type: 9.3 N·m (95 kgf·cm, 82 in.·lbf)
Remove these parts from the magnetic switch assembly:
(1) Starter housing
(2) Return spring
(3) Bearing
(4) Idler Gear
(5) Clutch assembly
ST02Y−03