Toyota T100 1996 Service Manual page 887

1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (5VZ−FE)
21.
(a)
(b)
(c)
P21245
22.
(a)
S02073
(b)
(c)
(d)
(e)
(f)
(g)
− CYLINDER HEAD
CONNECT ENGINE WIRE
Install the engine wire with the 3 bolts.
Connect the 3 engine wire clamps.
Connect these connectors:
Oil pressure sensor connector
S
Crankshaft position sensor connector
S
6 Injector connectors
S
ECT sender gauge connector
S
ECT sensor connector
S
Knock sensor connector
S
Camshaft position sensor connector
S
INSTALL INTAKE AIR CONNECTOR
Install a new gasket and the intake air connector with the
3 bolts and 2 nuts.
Torque: 18.5 N·m (185 kgf·cm, 13 ft·lbf)
Connect the DLC1 to the bracket.
Install the bolt, and connect the ground strap to the intake
air connector.
Connect the brake booster vacuum hose to the intake air
connector.
Connect the 2 fuel return hoses.
Install the engine wire with the bolt.
w/ A/C
Connect the A/C idle−up valve connector.
EM−59