Toyota T100 1996 Service Manual page 1759

SR−52
SST
1996 TOYOTA T100 (RM449U)
STEERING − POWER STEERING VANE PUMP (5VZ−FE)
7. INSTALL GASKET
Install a new gasket on the front housing.
NOTICE:
Be careful the direction of the gasket.
8. INSTALL SIDE PLATE
Align the 2 straight pins and holes of the plate.
R12191
9. INSTALL WAVE WASHER
Install the washer so that its protrusions fit into the slots in the
side plate.
10. INSTALL REAR HOUSING
(a) Coat 2 new O−rings with power steering fluid and install
them to the housing.
(b) Torque the 2 bolts.
Torque: 24 N·m (240 kgf·cm, 17 ft·lbf)
11. INSTALL SPRING, FLOW CONTROL VALVE AND
R12193
PRESSURE PORT UNION
(a) Install the valve facing the correct direction.
(See page SR−44)
(b) Coat a new O−ring with power steering fluid and install it
to the union.
(c) Torque the union.
Torque: 83 N·m (850 kgf·cm, 62 ft·lbf)
12. INSTALL BRACKET
Torque the 2 bolts.
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
13. INSTALL OIL RESERVOIR
(a) Coat a new O−ring with power steering fluid and install it
to the oil reservoir.
(b) Install the oil reservoir with the 3 bolts.
Torque:
Front side bolt: 13 N·m (130 kgf·cm, 9 ft·lbf)
Rear side bolts: 24 N·m (240 kgf·cm, 17 ft·lbf)
14. INSTALL VANE PUMP PULLEY
Using SST to stop the pulley rotating, torque the nut.
SST
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
15. MEASURE PS VANE PUMP ROTATING TORQUE
(See page SR−47)
R12181
09960−10010 (09962−01000, 09963−01000)