Toyota T100 1996 Service Manual page 1482

SA−12
Front
A B
Front
A: Inside
B: Outside
1996 TOYOTA T100 (RM449U)
SUSPENSION AND AXLE
(c)
HINT:
Face the clamp bolt toward the front of the vehicle.
FA0927
7.
B A
Turn the steering wheel fully, and measure the turning angle.
FA0018
If maximum steering angles differ from standard value, adjust
the wheel angle with the knuckle stopper bolts.
If the wheel angle still cannot be adjusted within limits, inspect
and replace damaged or worn steering parts.
R08117
8.
(a)
(b)
− FRONT WHEEL ALIGNMENT (4WD)
Torque the tie rod clamp bolt.
Torque: 22 N·m (225 kgf·cm, 16 ft·lbf)
INSPECT WHEEL ANGLE
Item Inside wheel
32°01' ± 2°
STD cab
(32.02° ± 2°)
32°14' ± 2°
Extra cab
(33.23° ± 2°)
Torque: 47 N·m (480 kgf·cm, 35 ft·lbf)
HOW TO READ ADJUSTMENT CHART
Mark on the graph the measurements taken from the ve-
hicle.
Example:
Camber 0°40' (0.67°)
Caster 0°35' (0.58°)
As shown in the chart, read from the graph the amounts
by which the from and/or rear cams are to be adjusted.
Amount to turn adjusting cam (by graduation):
Front cam −(Shorter) 1.8
Rear cam +(Longer) 3.1
Author :
Outside wheel
<Reference>
30°30'
(30.5°)
30°30'
(30.5°)
1451
Date :