Toyota T100 1996 Service Manual page 1763

SR−56
SST
1996 TOYOTA T100 (RM449U)
STEERING
REMOVAL
1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE STEERING WHEEL PAD
(See page SR−13)
3. REMOVE STEERING WHEEL
(See page SR−13)
4. DISCONNECT RH AND LH TIE ROD ENDS
(a) Remove the cotter pin and nut.
(b) Using SST, disconnect the tie rod end from the knuckle
arm.
SST
5. DISCONNECT INTERMEDIATE SHAFT ASSEMBLY
(See page SR−13)
6. DISCONNECT RETURN HOSE
7. DISCONNECT PRESSURE FEED TUBE AND REMOVE
RETURN TUBE
(a) Using SST, disconnect the pressure feed tube and re-
move the return tube.
SST
R04277
(b) Remove the O−ring from the tube.
8. REMOVE MOUNT BRACKET AND GROMMET
(a) Remove the 2 bolts.
(b) Remove the mount bracket and grommet from the PS
SST
gear assembly.
9. REMOVE PS GEAR ASSEMBLY
Remove the 2 gear assembly set bolts and nut.
R15246
− POWER STEERING GEAR (2WD)
09610−20012
09631−22020
SR07V−01