Toyota T100 1996 Service Manual page 1093

CO−10
15° 15°
1996 TOYOTA T100 (RM449U)
COOLING (3RZ−FE) − THERMOSTAT
INSTALLATION
1. PLACE THERMOSTAT IN WATER INLET HOUSING
(a) Install a new gasket onto the thermostat.
(b) Align the thermostat jiggle valve with the protrusion of the
water inlet housing, and insert the thermostat in the water
inlet housing.
P14834
HINT:
The jiggle valve may be set within 15° of either side of the pre-
scribed position.
2. INSTALL WATER INLET
Install the water inlet with the 2 nuts.
Torque:20 N·m (200 kgf·cm, 15 ft·lbf)
3. CONNECT RADIATOR OUTLET HOSE
4. FILL WITH ENGINE COOLANT
5. START ENGINE AND CHECK FOR LEAKS
P14833
CO05F−01