Toyota T100 1996 Service Manual page 1768

SST Bearing
SST
SST
SST
Oil Seal
Press
Oil Seal
1996 TOYOTA T100 (RM449U)
STEERING
Z14494
SST
Bearing
SST
R15250
SST
Bearing
R14219
R15249
SST
SST
R14003
− POWER STEERING GEAR (2WD)
(b) Using SST, remove the bearing from the rack housing.
SST 09612−24014 (09613−22011)
NOTICE:
Be careful not to damage the rack housing.
(c) Coat a new bearing with molybdenum disulfide lithunm
base grease.
(d) Using SST, press in the bearing.
SST 09950−60010 (09951−00250, 09951−00310,
09952−06010), 09950−70010 (09951−07150)
(e) Coat a new bearing with molybdenum disulfide lithunm
base grease.
(f) Using SST, press in the bearing.
SST 09950−60010 (09951−00310),
09950−70010 (09951−07150)
4. IF NECESSARY, REPLACE OIL SEAL
(a) Using SST, remove the oil seal from the rack bushing.
SST 09236−00101 (09237−00010),
09612−65014 (09612−01060)
NOTICE:
As shown, from the opposite side of SST confirm that
S
its claw is firmly caught on the bushing.
Be careful not to damage the bushing.
S
(b) Coat a new oil seal lip with power steering fluid.
(c) Using SST, press in the oil seal to the rack bushing.
SST 09950−60010 (09951−00260, 09951−00410,
09952−06010)
NOTICE:
Make sure to install the oil seal facing the correct direction.
SR−61