Toyota T100 1996 Service Manual page 826

B
A
(5)
(9)
(3)
(8)
1996 TOYOTA T100 (RM449U)
ENGINE MECHANICAL (3RZ−FE)
A
Z11443
(2)
(7)
(4)
(10)
(6)
(1)
Z11127
Up ward 90°
Painted Mark
Z15493
− CYLINDER BLOCK
30. INSTALL REAR END PLATE
Install the rear end plate with the 3 bolts.
Torque:
Bolt A: 18 N·m (185 kgf·cm, 13 ft·lbf)
Bolt B: 20 N·m (200 kgf·cm, 14 ft·lbf)
31. M/T:
INSTALL FLYWHEEL
(a) Install and uniformly tighten 10 new bolts to the flywheel,
in several passes, in the sequence shown.
Torque: 26.5 N·m (270 kgf·cm, 19 ft·lbf)
(b) Mark the top of the flywheel bolt with paint.
(c) Retighten the flywheel bolts by 90° in the numerical order
shown above.
(d) Check that the painted mark is now at a 90° angle to the
top.
32. A/T:
INSTALL DRIVE PLATE
Install the front spacer, drive plate and rear spacer with the 10
bolts.
Torque: 74 N·m (750 kgf·cm, 56 ft·lbf)
EM−103