Toyota T100 1996 Service Manual page 992

MF−28
1996 TOYOTA T100 (RM449U)
MFI (3RZ−FE) − THROTTLE BODY
REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE AIR CLEANER CAP, MAF METER AND
RESONATOR
(a) Disconnect the MAF meter connector, IAT sensor con-
nector and wire clamp.
(b) Loosen the air cleaner hose clamp.
(c) Loosen the 4 clips, and remove the air cleaner cap, MAF
meter and resonator.
3. M/T:
DISCONNECT ACCELERATOR CABLE FROM
THROTTLE BODY
4. A/T:
DISCONNECT ACCELERATOR AND THROTTLE
CABLES FROM THROTTLE BODY
P24769
5. REMOVE INTAKE AIR CONNECTOR
(a) Disconnect the 2 air hoses.
(b) Remove the 2 bolts, hose clamp and intake air connector.
6. REMOVE NO.1 AND NO.2 PCV HOSES
7. REMOVE THROTTLE BODY
(a) Disconnect the throttle position sensor connector.
(b) Disconnect the IAC valve connector.
(c) Disconnect the EVAP hose.
(d) Disconnect the 3 vacuum hoses.
(e) Remove the 2 bolts, 2 nuts and disconnect the throttle
body from the air intake chamber.
Torque: 20 N·m (200 kgf·cm, 14 ft·lbf)
(f) Remove the throttle body gasket.
P21655
HINT:
At the time assembly please refer to the following items.
Install the throttle body with a new gasket.
(g) Disconnect the No.1 and No.2 water bypass hoses from
the throttle body, and remove the throttle body.
P21654
SF0B2−02