Toyota T100 1996 Service Manual page 1563

SST
1996 TOYOTA T100 (RM449U)
SUSPENSION AND AXLE
REPLACEMENT
1. REMOVE BUSHING
(a) Remove the 2 bolts and retainers.
(b) Using SST, remove the 2 bushings.
SST SST
Z03685
2. INSTALL NEW BUSHING
(a) Using SST, install 2 new bushings.
SST
(b) Install the washer and tighten the bolt by the hand.
NOTICE:
Do not torque the bolts.
HINT:
At the time of installation, after stabilizing the suspension,
torque the bolts.
Z03686
Torque: 126 N·m (1,280 kgf·cm, 93 ft·lbf)
− FRONT UPPER SUSPENSION ARM (2WD)
09710−30021 (09710−03031, 09710−03041)
09710−30021 (09710−03051, 09710−03061)
SA−93
SA0GX−01